#Raspberry pi usb drive format manual
#Raspberry pi usb drive format windows

sd 1:0:0:0: Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access Maxtor OneTouch 0200 PQ: 0 ANSI: 0 CCS

input: Maxtor OneTouch as /devices/platform/soc/b/usb1/1-1/1-1.2/input/input1 ums-onetouch 1-1.2:1.0: USB Mass Storage device detected usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=2 usb 1-1.2: New USB device found, idVendor=0d49, idProduct=7000 I powered it up and so far the dmesg output looks good: usb 1-1.2: new high-speed USB device number 5 using dwc_otg I have connected the drive to Dell server running CentOS 6 and don't have any problem with it there, but I do on the Raspberry Pi 2. My goal is to format the drive to use it as ext4, but I'm having troubles along the way with error messages. Linux raspberrypi 4.0.6-v7+ #799 SMP PREEMPT Fri Jun 26 15:50: armv7l GNU/Linux It has the latest updates, upgrades and firmware. To do this via terminal, first enter the command df to print a list of the file systems.I have an old Maxtor USB 250GB external drive I'm trying to use on the Raspberry Pi 2 running Raspbian. The reason for moving the whole folder, and not just /home/pi/RetroPie/roms is that there are other folders, such as /home/pi/RetroPie/BIOS, that are worth keeping on the external drive also. RetroPie has a specific directory structure and a number of files required packaged with even empty installations.Д®ither via SFTP, or using the terminal (via exiting emulationstation, pressing F4, or remotely using SSH), move the /home/pi/RetroPie folder into your USB stick. This step is mandatory regardless of whether you have any roms on your system. Transfer the existing RetroPie file structure This can be done when the system is powered on.

Enter the RetroPie Setup menu within the RetroPie menu in EmulationStation.

Video TutorialДЄfter formatting your USB based on the above step: Disable USB transfer daemon It is recommended that you allow a decent amount of time for the process to sync. The XU4 and its OS do not respond the same as the Raspberry Pi with Rasbian and it does not provide a way to know when the sync is completed. Once the folder structure is copied over the USB will be mounted over the RetroPie folder so any ROMs you add to your Pi will be run off of the USB. It is easiest if you haven't added any roms yet. Note: if you have a large ROM collection already on the SD card it will copy all of the ROMs too so make sure your USB is large enough.

It will proceed to automatically copy the RetroPie folder AND all of its contents (you may need to reboot to start the copying).Create a folder called retropie-mount on the USB drive.

#Raspberry pi usb drive format windows

Instructions to format on Windows (various)Д«efore proceeding, make sure the usbromservice (Optional packages section) is installed and enabled, especially if you have installed RetroPie manually.Format USB driveД®ither on linux, or on a PC, format the USB drive to FAT32 (used in this guide as it is the most compatible across different operating systems):

#Raspberry pi usb drive format manual

Below there are two ways to accomplish this: an automated method, or a manual method. There are a number of ways you can achieve this, but the following method is desirable as it fully integrates the USB drive with the existing directory structure, rather than requiring you to tweak configuration files so RetroPie is looking for ROMs in a different place. USB storage devices should mostly all work.

Compatibility: microSD cards suffer from compatibility issues with Raspberry Pi systems.

Capacity: USB storage can reach huge capacities, whereas microSD is limited.

Cost: USB storage tends to be cheaper than the equivalent microSD card.

Speed: USB transfer speeds can be faster than SD card transfer speeds (see Raspberry Pi Benchmarks).

Easy ROM transfer: When the system is off, you can remove the stick and plug it into any other computer and easily copy-and-paste ROMs into the correct folders.

Simply remove the USB stick, re-image the SD card, re-apply these setup instructions, and all that data is retained.

Separation of data: In the event that a RetroPie installation becomes corrupted or a new image is required, any ROMs, saves, etc, are not lost.

Reliability: USB storage can be less sensitive to corruption than SD cards.

Rather than running everything from an SD card, it can be desirable to store and run ROMs from an external USB drive. Transfer the existing RetroPie file structureД¬onfigure fstab to automatically mount USB driveД¬onvert RetroPie SD Card Image to NOOBS Image Universal Controller Calibration & Mapping Using xboxdrv Validating, Rebuilding, and Filtering Arcade ROMs